FL Lamps | PerkinElmer
PerkinElmer

FL Lamps

Our Fluorescence Spectrometers use pulsed Xenon discharge lamps, which are not only very reliable and stable, but also provide remarkable sensitivity with a peak intensity exceeding 1 KW. To maintain optimum stability and sensitivity of your instrument, installation of a new lamp by a PerkinElmer service engineer is recommended. Additionally, Xenon lamp quartz envelopes are under pressure, requiring eye protection and extreme caution in handling.

产品与服务 (4)
Filters:

筛选条件

全部展开 全部折叠
长度
材料
  • Xenon (2)
温度-最高
温度-最低
产品组
  • Bulbs & Lamps (2)
  • Calibration Reference Materials (2)
体积

排序方式

1-4 的 4 产品与服务

  • Xenon Source Lamp - 7.3 W

    The Xenon Source Lamp uses a pulsed xenon discharge of 7.3 W average power at 50 Hz. This reliable source produces very little ozone or heat but provides remarkable sensitivity due to its peak intensity exceeding 1 KW. Compatible with the LS 30/40/50 spectrometers.

  • Festoon Lamp for the LS Series

    Festoon Lamp - 3 W

    The Festoon Lamp, 3 W is used along with the Xenon Source Lamp, 7.3 W to maintain even triggering and stability in our LS 30/40/45/50/50B/55 spectrometers. This lamp is also comapatible with the LC 240.

  • PerkinElmer

    Luminescence Sample Block Set

    The Luminescence Sample Blocks Set includes six PMMA (polymethyl-methacrylate) blocks with emission characteristics in the wavelength ranges indicated as follows:

    • 300 to 540 nm (anthracene/napthalene)
    • 420 to 600 nm (ovalene)
    • 300 to 400 nm (p-terphenyl)
    • 400 to 600 nm (tetraphenyl/butadiene)
    • 600 to 640 nm (European)
    • 540 to 640 nm (Rhodamine B)
  • PerkinElmer

    Fluoroscopy Water Standard - 10 mm

    This Fluoroscopy Water Standard is a stable sample of high-purity water, distilled, de-ionized, and out-gassed. It is vacuum sealed in a standard 10 mm quartz cuvette. It has a usable range of 250-600 nm.