差示扫描量热 (DSC)

Multi-purpose Tygon R2400 tubing is used on a variety of different PerkinElmer instruments. It has an outer diameter 0.25 in, inner diameter 0.125 in, and is black. The tubing is sold by the foot.

The Aluminum Pan Starter Kit includes fifty of each type of aluminum pan and 350 covers. This starter kit is for use with the Pyris 1 Autosampler, DSC 7 RS and DSC -4 RS.

These Copper Sample Pans and Covers have an operating range of -170 to 730°C and a volume capacity of 40 µL. Typically used in applications such as antioxidant testing (O.I.T.), thermoset and thermoplastic glass transitions, and melting point determinations. Included are 200 pans and 200 covers.

This Aluminum Vapor Pressure Pan Kit includes 100 volatile pans and 100 pierced covers with a 50 µm diameter hole centered in the cover which can be used for finding boiling points, heat of vaporization, or sublimatation studies. Each aluminum sample pan and cover has an operating range of -170° to 600 °C and a volume 20 µL.

Non-magnetic.

These stainless steel straight forceps are hooked, non-magnetic, and non-serrated.

The Extension Autozero Cylinder is a reference standard used to calibrate the TMA 7, DMA 7, and DMA 7e analyzers. It comes standard in the TMA 7 Extension Analysis Kit (N5190619).

The Temperature Calibration Kit Kit Includes an Indium wire (1.5 mm dia), a PMMA test sample (Qty. 5), and FEB tubing.

The Tare Weight Set consists of 12 stainless steel, flat body weights, ranging from 1 to 500 mg. Each weight is labeled with its weight value. Weight values meet ASTM 6 Class tolerances. This set also includes a set of forceps. This set can be ordered separately using this part number.

Filter Dryer Kit removes moisture and particulates from your purge gas. Includes all the necessary fittings needed to make pneumatic connections easy

The Stainless Steel Calibration Material is used to calibrate the DMA 8000 anaylzer.

The Standard Stirrup Kit includes two matched stirrups consisting of a hook, stirrup ring, and frame designed to support a sample pan sitting inside the stirrup ring. These stirrups are used with the Provectus 6500 Ultramicrobalance and ship with the Provectus 6500 Installation Kit.

The Quick Press Spacer Die is a spool-like, stainless steel rod, approximately 7/8 in high with a diameter of 0.875 in. It is a component of the Quick Press and is used to seal large volume stainless steel capsule. Qty. 1

This replacement Crimper Head is a replacement part for the Standard Sample Pan Crimper Press (02190048). With this part number, you can purchase a crimper head as a replacement or spare.

Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021).

For use with the Pyris 1 DSC Autosampler. Two required for each sample holder. Use these pans and covers when gold and graphite pans and covers are not suitable. Used to analyze mineral, soil, and ceramic samples. Also used to allow a chemical reaction where platinum acts as a catalyst. Covers are easy to clean and are reusable. A crimper is not required.

The Perkalloy Wire Kit is a calibration standard for TGA analyzers. Perkalloy has a magnetic transition temperature of 596°C for the TGS-2. This kit includes three 2-in long wire pieces of Perkalloy and a Certificate of Analysis.

This kit includes Quick Press (09908467), Quick Press Spacer Die (03191047), 1 pair of guard Ring Inserts (03190236), and 20 of each Pan, Cover and O-Ring (03190218). Pans can withstand an internal pressure of 24 bar, which allows water samples to be heated higher than 100 °C. Each pan has an operating range of -40 °C to 300 °C, unless otherwise limited by the sample vapor pressure.

The DSC Sample Calibration Kit includes a small calibration sample of Indium, a foil strip calibration sample of Zinc, an Aluminum Sample Pan Kit (02190041), and a 6 mm Calibration Disc (02510008).

The Sealing Insert for 10µL, 30µL and 50µL Autosampler Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp hermetically-sealed or volatile pans, such as Autosampler Pans and Covers (B0169319).

The Sealing Insert for Volatile Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp vented or pierced pans such as Aluminum Pans and Covers (N5190788). Qty. 1

The Sealing Insert for Large Volume Stainless Steel Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp larger volume pans, such as the Stainless Steel Pans, Covers, and O-rings set (03190218). Qty. 1

The Sealing Insert for Standard Aluminum Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp standard pans such as the Standard Aluminum Pans and Covers (02190041). Qty. 1

These aluminum flat pans are for the standard stirrup kits used on the AD-4, AD 6000 and the Provectus 6500 microbalance for weighing samples.

The Universal Crimper Press provides high quality sample crimping for the Autosampler sample pans and can crimp the standard aluminum pans, O-Ring sealed large volume steel pans, and the 20 µL volatile pans. This is achieved simply by using the appropriate sealing insert with the Universal Crimper Press.